Ketorolac removal through photoelectrocatalysis using TiO2 nanotubes in water system.

Ketorolac, a highly persistent NSAID of environmental concern, was significantly removed from water (80% removal) through photoelectrocatalysis where titanium dioxide nanotubes prepared by Ti foil electrochemical anodization at 30 V were used as photoanodes. Fifteen milligrams per liter of ketorolac solutions in a 0.05 M Na2SO4 aqueous medium was subjected to irradiation from a 365-nm light with an intensity of 1 mWcm-2 and under an applied potential of 1.3 V (vs. Hg/Hg2SO4/sat.K2SO4) at pH 6.0. When each process (photo and electrocatalysis) was carried out separately, less than 20% drug removal was achieved as monitored through UV-vis spectrophotometry. Through scavenging experiments, direct oxidation on the photogenerated holes and oxidation by hydroxyl radical formation were found to play a key role on ketorolac's degradation. Chemical oxygen demand (COD) analyses also showed a significant COD decreased (68%) since the initial COD value was 31.3 mg O2/L and the final COD value was 10.1 mg O2/L. A 48% mineralization was also achieved, as shown by total organic carbon (TOC) analyses. These results showed that electrodes based on titania nanotubes are a promising alternative material for simultaneous photocatalytic and electrocatalytic processes in water remediation.

Mesostructured lead dioxide grown on titania nanotubes for diclofenac water removal through electrocatalytic and photoelectrocatalytic processes.

Mesostructured PbO2/TiO2 materials were synthesized to perform electrocatalysis (as electrooxidation, EO) and photoelectrocatalysis for removing diclofenac (DCF), 15 ppm concentration in 0.1 M NaSO4 solutions, at different pH conditions (3.0, 6.0 and 9.0) by applying 30 mA cm-2. Titania nanotubes (TiO2NTs)-based materials were prepared to synthetize with a massive PbO2 deposit on this support to obtain TiO2NTs/PbO2 and a TiO2NTs:PbO2 material consisting in a dispersed PbO2 deposit on TiO2-NTs that allowed the formation of a heterostructured surface of combined composition (TiO2 and PbO2). Organics removal (DCF and byproducts) was monitored through UV-vis spectrophotometry and high-performance liquid chromatography (HPLC) during degradation tests. TiO2NTs/PbO2 electrode was tested in both processes, removing DCF at neutral and alkaline solution conditions in EO while an unimportant photoactivity was registered at this material. Conversely, TiO2NTs:PbO2 was used as electrocatalytic material in EO experiments, achieving more than 50% of DCF removal at pH 6.0 by applying 30 mA cm-2. Also, for first time, the synergic effect was investigated when it was exposed to UV irradiation in photoelectrocatalytic experiments, enhancing its efficacy (⁓more than 20%) to remove DCF from a solution with 15 ppm over performance removals achieved (56%) when EO was applied under similar conditions. Chemical Oxygen Demand (COD) analyses showed that significantly higher DCF degradation is reached under photoelectrocatalysis, since COD values decrease a 76% against a 42% decrease achieved with electrocatalysis. Scavenging experiments showed a significant participation on the pharmaceutical oxidation process through the generation of photoholes (h+), hydroxyl radicals and sulfate-based oxidants.

Plasmonic Spherical Nanoparticles Coupled with Titania Nanotube Arrays Prepared by Anodization as Substrates for Surface-Enhanced Raman Spectroscopy Applications: A Review.

As surface-enhanced Raman spectroscopy (SERS) continues developing to be a powerful analytical tool for several probes, four important aspects to make it more accessible have to be addressed: low-cost, reproducibility, high sensibility, and recyclability. Titanium dioxide nanotubes (TiO2 NTs) prepared by anodization have attracted interest in this field because they can be used as safe solid supports to deposit metal nanoparticles to build SERS substrate nanoplatforms that meet these four desired aspects. TiO2 NTs can be easily prepared and, by varying different synthesis parameters, their dimensions and specific features of their morphology can be tuned allowing them to support metal nanoparticles of different sizes that can achieve a regular dispersion on their surface promoting high enhancement factors (EF) and reproducibility. Besides, the TiO2 photocatalytic properties enable the substrate's self-cleaning property for recyclability. In this review, we discuss the different methodological strategies that have been tested to achieve a high performance of the SERS substrates based on TiO2 NTs as solid support for the three main noble metal nanoparticles mainly studied for this purpose: Ag, Au, and Pt.

Effects of effluent from a hospital in Mexico on the embryonic development of zebrafish, Danio rerio.

Hospitals consume a large amount of water, so they also generate large amounts of wastewater, which contain a wide variety of contaminants. It is important to consider that hospital effluents are a mixture of pollutants that can interact with each other and have a negative impact on aquatic species of water bodies. The aim of this study was to evaluate the effects induced by a hospital effluent using Danio rerio embryos. In this study, Danio rerio embryos were exposed to different concentrations of the hospital effluent and a lethality test was evaluated and the malformations present in zebrafish embryos were evaluated. The lethal concentration of effluent 50% was 6.1% and the effective malformation concentration was of 2.5%. The teratogenic index was 2.45%. The main malformations identified were yolc sac malformation, pericardial edema, hatching abnormalities, hypopigmentation, tail deformation, chorda malformation, without fin, chorion deformation and craniofacial malformation. The risks that this type of water represents for the survival of living organisms, as well as the presence of malformations in them, are reference indicators for a future regulation focused on the adequate treatment of hospital effluents.

Removal of the pesticide methamidophos from aqueous solutions by electrooxidation using Pb/PbO2, Ti/SnO2, and Si/BDD electrodes.

The anodic oxidation of methamidophos (MMD), a highly toxic pesticide used worldwide, was studied in a sodium sulfate aqueous solution on Pb/PbO2, Ti/SnO2, and Si/BDD (boron doped diamond) electrodes at 30 degrees C. Under galvanostatic conditions, it was observed thatthe performance of the electrode material is influenced by pH and current density as shown by HPLC and ATR-FTIR analysis of MMD and its oxidation products along the electrolysis. It was found that MMD degradation using Pb/PbO2 in acid media (pH 2.0 and 5.6) generates formaldehyde asthe main product of the reaction giving evidence of an indirect mineralization mechanism. Under the same conditions, Ti/SnO2 showed poor formaldehyde production compared to the Pb/PbO2 electrode. On Si/BDD electrodes formaldehyde production was not observed, instead the ATR-FTIR results showed the formation of phosphate as the reaction progressed suggesting a complete MMD mineralization on this electrode. In addition, HPLC results showed that the electrode efficiency is also dependent on the applied current density. This current density influence is remarkably clear on the Si/BDD electrodes where it was evident that the most efficient current density toward a complete MMD mineralization was reached with the application of 50 mA/cm2.